227IECRV阻燃铠装软电缆山南30X0.4
用于野外线路、电器仪表、电讯广播、防盗报警系统、楼宇对讲系统、监控系统、电子设备及自动化装置等线路中。
使用条件 ：1：使用温度（℃): -40～+60 2:相对温度:40℃时达98% 3:安装敷设温度不低如: -15℃ 4:充许弯曲半径:室内不小于5倍,室外10倍 电缆结构 ： 1:镀锡铜丝线芯 2:聚氯绝缘 3:薄膜绕包/镀锡铜丝编织网 4聚氯护套 额定电压: 300V/300V 300V/500V 采用标准: JB8734-1999
ZRVVR RVVZ ZR-RVV通信用阻燃软电缆 本产品是适用于通信局（站）及高层建筑等电源的输、配电系统中用的阻燃软电缆。
（注意：这25对用“白兰”色环标识线缠着）1对—白兰2对—白桔3对—白绿4对—白棕5对—白灰6对—红兰7对—红桔8对—红绿9对—红棕10对—红灰11对—黑兰12对—黑桔13对—黑绿14对—黑棕15对—黑灰16对—黄兰17对—黄桔18对—黄绿19对—黄棕20对—黄灰21对—紫兰22对—紫桔23对—紫绿。
IA-DJVVP3R IA-DJYVP3R IA-DJYJVP3R 本安型、铝塑复合膜总软结构 。IA-DJVPVPR IA-DJYPVPR IA-DJYJPVPR 本安型、编织分对、总（铜丝或镀锡丝）软结构。
售后服务是全屋定制的诚信保证在一次定制家居产品售后服务调查中，有37%受访者表示需要品牌售后服务，有近7%受访者则认为买家居得先看其售后服务记录。部分消费者表示，其因在于定制产品普遍在丈量尺寸、给出设计方案、出图之后便要求付全款，付款之后店家才会给工厂下单，消费者怕付全款之后，一旦买家违约或者拖沓，将很难进行维权。如何增加消费者的安全感，定制经销商回应：客户下订单以后，需要派出设计师上门量尺，出设计稿，下单给工厂，整个过程都需要付出成本，一旦客户退单，我们将无法二次销售，因此需要下订金，确定设计图纸后付全款。
本产品是适用于通信局（站）及高层建筑等电源的输、配电系统中用的阻燃软电缆。
产品标准：YD/T1173-2001
产品型号：ZA-RVV（ZRRVV ZRVVR RVVZ）通信电源用阻燃软电缆 。ZA-RVV22（ZRRVV22 ZRVVR22 RVVZ22）通信电源用阻燃钢带铠装软电缆 。
本产品适用于架空、管道、室内电缆沟、地下直埋。山南227IECRV阻燃铠装软电缆
RVVP电缆产品特点用途：本产品适用于交流额定电压300/300V及以下电器、仪表、电子设备及自动化装置。
Precautions for installation of power cables: keep 2m distance when the cable is installed in parallel with the thermal pipe, and 0.5m should be maintained when crossing. The cable shall be installed at a distance of 0.5m in parallel or across other pipelines. When the cable is directly buried and installed, the direct buried depth of 1-35kv cable is less than 0.7m. When 10KV and below cables are installed in parallel, the net distance between them shall not be less than 0.1m and 10-35kv shall not be less than 0.25m. The distance of cross installation is not less than 0.5m. Cable laying temperature lower than 0 ℃, bending radius: multi-core cable or 15 (D + D), a single cable 20 or more (D + D), (D for cable diameter, D) for the conductor diameter. ? 6KV and above cable connector:? When installing the terminal head of the cable, the semiconductor electrical shielding layer must be stripped off. During operation, the insulation shall not be damaged. The shield end should be flat and the graphite layer (carbon particles) should be clean. (2) plastic cable end copper tape screened and armor must be good grounding, the short circuit also follow this principle, oid unbalanced three-phase run ShiGang armoured end produce inductive electromotive force, and even "lighter" and sheath and other accidents. It is required to use my tinplate to braid copper wire for grounding lead. When connecting with the cable copper belt, it should be welded with chromium-iron tin. ? The shield of three-phase copper tape should be connected with ground wire respectively. Note that the shielded ground wire and steel armor ground wire should be separately drawn out and insulated from each other. The position of the welded ground wire should be as low as possible. Basic requirements for cable terminals and intermediate joints: a. good conductor connection; B. The insulation is reliable, and it is recommended to use irradiated cross-linked heat-shrinkable silicone rubber insulation materials; C. good sealing; D. sufficient mechanical strength to meet various operating conditions. The end of the cable must be used to prevent water and other corrosive materials from corroding, in order to prevent the water tree caused by the aging of the insulation layer and breakdown. Crane or forklift should be used for the loading and unloading of cables. It is forbidden to run flat or lay flat. For installation of large cables, cable laying cart should be used to oid external damage or abrasion caused by manual dragging. If the cable cannot be laid in time for some reason, it should be stored in a dry place to prevent sunlight from exploding and water entering the end of the cable. ? Note: the installation of wire and cable should be familiar with the performance of wire and cable installation personnel or full-time technical personnel, if there are still unclear matters, ball related technical department or technical department of our factory.
电缆的要求是根据不同场合分别采用：对绞组合、对绞组成电缆的总、对绞组合后总等方法。材料有圆铜线，铜带、铝带/塑料复合带三种。对与对具有较好的绝缘性能，电缆在使用中若对对之间出现电位差时，不会影响信号的传输质量。
Steel tape armoured mainly as the radial mechanical protection layer of the cable, and it also he additional total shielding effect, especially steel tape armoured and copper wire, copper tape screened, is adopted two different shielding materials, play a complementary role in electromagnetic we shielding, shielding effect will be better.
因为经过较长时间后，各连接点产生氧化，锈蚀等情况会使仪表实际上不起作用。防晒：应避免阳光直射在仪表黑色外壳上，否则有可能会使仪表工作环境超过额定温度范围而损坏。防水：一般情况下，仪表工作环境的湿度虽可达95%，但都规定不能产生结露。特殊的具有防水功能的不锈钢外壳仪表除外。防腐：腐蚀性物质不能渗进仪表内部，否则会对线路板上的器件和线路板本身产生腐蚀，时间一长，可能会使仪表报废。即使是具有防腐功能的仪表，如果封闭不严，也会有同样的结果。防雷击：电子衡器属于弱电系统，容易受到雷电的袭击而损坏部件。雷电主要从两个方面进入仪表：由电源线导入和由秤台经信号缆导入。在正常天气下，操作人员只要操纵电源开关即可，但在可能发生近距离雷击的情况下，必须拔下仪表电源插头及秤台信号电缆插头。采取防雷击措施，在仪表电源回路中增加防浪涌保护器等。防强电：22伏以上的电源火线意外地搭到秤台或利用秤台作地线，在秤台上进行电焊操作都有可能损坏仪表。清洁：在工业环境下，仪表外壳上会有积灰或受到污染，必须在断电情况下经常用湿抹布擦干净。但要注意不能用酒精等溶剂擦拭显示窗，这样会使透光性能变坏，显示模煳不清。.防静电：一旦仪表损坏，就要送修。有的单位为了使来回传递的速度加快，喜欢把仪表的PCB板拆下来，用特快专递邮寄，这就产生一防静电的问题。取PCB板时要手持板的四角，切勿用手摸到有集成块引脚的地方。因为这样容易让静坏集成块。拆下的PCB板应立即装入袋，在没有袋的情况下可用普通报纸包好。
RVVP电缆用途：本产品适用于交流额定电压300/300V及以下电器、仪表、电子设备及自动化装置。
RVVP电缆产品标准：GB5023.5-86《额定电压450/750V及以下聚氯绝缘电缆（电线）电线》
RVVP电缆使用特性：1）额定电压U0/U为300/300V；2）电缆的长期允许工作温度：P-105、RVP-105型……应不超过105℃；其他型号……应不超过70℃
RVSP系列在RVS的基础上再加上一层铜丝网,因此在减少信号的传输损耗,外界干扰方面比RVS系列效果更好,但由于增加了铜丝网,它的成本也比RVS系列高出许多.常被用于那些对传输的信号要求很高的场合.。
RVSP系列在RVS的基础上再加上一层铜丝网,因此在减少信号的传输损耗,外界干扰方面比RVS系列效果更好,但由于增加了铜丝网,它的成本也比RVS系列高出许多.常被用于那些对传输的信号要求很高的场合。
；MHYV矿用通信电缆、矿用通信电缆MHYA32矿用通信电缆、MHY矿用通信电缆、MHY32矿用通信电缆、MHYVR矿用通信电缆、MHYVP矿用通信电缆、MHYVRPMHYV1*2*0.5矿用通信电缆1*2*0.6矿用通信电缆1*2*0.7矿用通信电缆1*2*0.8MHYV1*4*0.5矿用通。
冷镦利用模具在常温下对金属棒料镦粗成形的锻造方法,通常用来制造螺钉、螺栓、铆钉等的头部。锻坯材料可以是铜、铝、碳钢、合金钢、不锈钢和钛合金等。冷镦多在专用的冷镦机上进行,便于实现连续、多工位、自动化生产。在冷镦机上能顺序完成切料、镦头、聚积、成形、倒角、搓丝、缩径和切边等工序。下面亿达渤润石化简单介绍下如何选用冷镦原材料:冷镦机设备的性能优势常温下冷墩成型,工作表面光洁度好、精度高、强度性能优良。冷墩属于少无切削工艺,节约原材料,减少用工成本,避免其他机床重复投资。
Computer cable USES: this product is widely used in electricity, metallurgy, petroleum, chemical industry, textile and other departments of detection and control in a computer system or automated devices, as well as general industrial computer. Features: rated voltage UO/U is 300/500v. Allowed working temperature does not exceed 70 ℃, laying temperature not lower than 0 ℃, allowed bending radius should not less than 12 times of cable outer structure of soft cable should be no less than eight times outside the cable, copper tape screened cable shall be less than 15 times of cable diameter. Product code and significance: dj-electronic computer cable y-polyethylene v-polyvinyl chloride R- represents multiple strands of soft core p-copper wire shielding p2-copper belt shielding P3 aluminum plastic compound